2016–2023 Toyota Tacoma Lift Kits: Check Lug Pattern, Trim and Wheels

Third-generation Tacoma lift kits span mild coil-over systems through 6-inch lifts, but 5-lug/6-lug fit, TRD exclusions and wheel requirements can change which system actually works.

The 2016–2023 Tacoma has several distinct lift-system paths

Current manufacturer applications for the 2016–2023 Tacoma range from 2-inch coil-over systems to 6-inch bracket-style lifts. Some products also span earlier Tacoma years, but the third-generation truck still needs its own checks for 5-lug vs 6-lug configuration, TRD Pro and T/X Baja exclusions, drivetrain and wheel requirements.

The important point is that “fits 2016–2023 Tacoma” does not mean every trim or wheel setup is covered. Current options from BDS, Rough Country, ReadyLIFT and Zone Offroad systems with materially different installation and wheel/tire requirements.

Current 2016–2023 Tacoma lift-kit options

SystemDriveLiftImportant fit or setup note
BDS BDS835FNR4WD2 in.FOX 2.5 IFP coil-over system with up-to-33-inch tire guidance.
Rough Country 7452WD/4WD3 in.Excludes 5-lug, TRD Pro and T/X Baja; two-piece driveshaft may need a carrier-bearing drop.
Rough Country 757202WD/4WD4 in.Excludes 5-lug, TRD Pro and T/X Baja; aftermarket wheels are required.
BDS BDS823FS4WD6 in.Up-to-35-inch tire guidance on the current manufacturer page.
ReadyLIFT 44-56602WD/4WD6 in.6-lug only; excludes TRD Pro, TX Baja and XSP-X; minimum 18-inch wheel.
Zone Offroad 6-inch4WD6 in.Nitro or FOX Adventure shock options with up-to-35-inch tire guidance.

5-lug, 6-lug and trim exclusions come before lift height

Several current Rough Country Tacoma systems explicitly exclude 5-lug trucks, TRD Pro and T/X Baja. ReadyLIFT’s 44-5660 is also a 6-lug-only application and excludes TRD Pro, TX Baja and XSP-X. Those restrictions can remove a product before advertised height, shock brand or price becomes relevant.

If the truck’s wheel-lug configuration or trim is uncertain, confirm that information first. The Lift Kit Finder keeps those fit details separate from optional preferences.

Wheel requirements change substantially at 4 and 6 inches

Rough Country’s current 4-inch 75720 product page states that factory wheel backspacing/offset can contact the supplied knuckles, so aftermarket wheels are required. ReadyLIFT’s 6-inch 44-5660 requires at least an 18-inch wheel and publishes 35-inch tire examples on 18×9 wheels at +12, 0 and -18 mm offsets.

Those are different fit conditions even though both systems target the same Tacoma generation. A tire diameter by itself is not enough to choose between them; wheel width and position are part of the manufacturer guidance. See the Lift Kit Tire Size Guide for the broader clearance framework.

Installation scope also changes with system architecture

The current Rough Country 3- and 3.5-inch product pages list cutting as required, while the 4-inch 75720 publishes both cutting and drilling. Larger systems from other brands use their own crossmember, suspension and shock arrangements. Compare the installation notes for the exact product rather than assuming every third-generation Tacoma lift at the same height requires the same work.

Compare this generation with the 2024–2026 Tacoma

The 2024 redesign introduces a different suspension decision, including coil-spring vs rear leaf-spring distinctions and TRD Off-Road-specific applications. If you have the newer truck, use the 2024–2026 Tacoma Lift Kits guide instead. For the broader Tacoma overview, return to Toyota Tacoma Lift Kits.

Shopping after the exact Tacoma configuration is confirmed

Browse Tacoma lift kits

Manufacturer sources used for this guide

Frequently asked questions

Do 2016–2023 Tacoma lift kits fit 5-lug trucks?

Not all of them. Several current Rough Country applications exclude 5-lug trucks, and the ReadyLIFT 44-5660 is specifically a 6-lug application.

Can a 2016–2023 Tacoma TRD Pro use any lift kit listed for those years?

No. Several current systems cited in this guide explicitly exclude TRD Pro, so the exact trim must be checked on the manufacturer application.

Do 6-inch Tacoma lift kits require aftermarket wheels?

Requirements vary by system. ReadyLIFT publishes a minimum 18-inch wheel and specific offsets, while other systems publish their own backspacing or stock-wheel restrictions.

Is the 2024 Tacoma suspension the same as the 2016–2023 Tacoma?

No. The 2024 redesign introduces different suspension and factory-package decisions, so use a 2024–2026-specific application rather than carrying third-generation fitment forward.